Fiber optic Pigtail is a fiber optic cable capped at one with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment.

Fiber optic cable is available in both single mode and multimode versions,the SC connector has a zirconia ceramic ferrule with pre-polished UPC profile and convex spherical end.

These end-face types allow for faster polishing, and low back reflection and optical loss, while ensuring maximum repeatability.

100% optic test: Insertion Loss: ≤0.3 (PC); ≤0.2 (APC); ≤0.2 (UPC); ≤0.3 (SPC);
100% optic test: Return Loss: ≥45 (PC); ≥60 (APC); ≥55 (UPC); ≥50 (SPC);
Excently qualified standard PC, APC, UPC, polishing
Simplex and duplex connector available
High precision of mechanical dimensions
Good exchange ability and good durability

1.1 Application

Optical System Access Network
Telecommunications networks
Broadband/CATV networks
Data communications networks, including high-bandwidth equipment

2. Features

Improves and simplifies fiber routing
Decreases fiber management space
OEM or customized for special applications
Low insertion loss and reflectance
High Density
Snap-In cassette panel for easy installation, removal and expansion

3. Specification

	Single-mode			Multimode
	PC	UPC	APC	PC
Insertion Loss	≤0.3dB	≤0.3dB	≤0.2dB	≤0.2dB
Return Loss	≥45dB	≥50dB	≥60dB	≥35dB
Operating Wavelength	1310nm, 1550nm			850nm,1300nm
Repeatability	≤0.1dB
Working Temperature	-40℃~+75℃
Service Life	>1000 mating cycles

4. Prodcut Picture

5.Packing
Cable is supplied in lengths as specified in PI or as requirement. Each length will be shipped on a separate iron-wooden drum. The minimum barrel diameter of the drum will not be less than 30 times the cable diameter.
The cable ends will be sealed with plastic protection caps to prevent water penetration. The ends will be easily accessible for testing. A final inspection test report with attenuation performance data for each fiber is attached inside the drum.

Inquiry Cart 0